How do I get the Crystal Jacket off of my iPod Classic?

1. Remove the clip from the Crystal Jacket
   
2. Place a credit card in the upper right hand corner between the front and back of the Crystal Jacket.
   
3. Apply pressure and separate the front and back of the Crystal Jacket to open.

How do I get the Crystal Jacket off of my iPod Touch?

1. Remove the clip from the Crystal Jacket
   
2. Place a credit card in the bottom right hand corner between the front and back of the Crystal Jacket.
   
3. Apply pressure and separate the front and back of the Crystal Jacket to open.

How do I get the Crystal Jacket off of my iPod Nano?

1. Remove the clip from the Crystal Jacket
   
2. Place a credit card in the upper right hand corner between the front and back of the Crystal Jacket.
   
3. Apply pressure and separate the front and back of the Crystal Jacket to open.

How do I get the Crystal Jacket off of my iPhone?

1. Remove the clip from your Crystal Jacket
   
2. In the upper left hand corner, where the volume control is, place your thumbs on the front and back of the Crystal Jacket. Apply pressure and pull apart the front part of the Crystal Jacket from the back part.
   
3. The first time taking the Crystal Jacket off will be the hardest; don’t be afraid to apply pressure when removing the Crystal Jacket.

How do I apply or remove the Crystal or Anti-Glare Film to my Product?

1. For optimal adhesion, lightly moisten a lint- free cloth with glass cleaner or rubbing alcohol and thoroughly clean the LCD screen. Make sure that all deposits have been removed before continuing.
   
2. Starting at one edge, position the film as you slowly peel away the backing (the backing is the larger piece), secure the film to the screen, and press out air bubbles with your lint-free cloth.
   
3. To remove the Film from your product, apply a strip of cellophane tape to the corner of the Film and peel back.

How do I clean my Crystal or Anti-Glare Film?

1. Remove the film from your product.
   
2. Clean the surface of the product with a lint free cloth and glass cleaner.
   
3. Take the films and place them under low pressure running water.
   
4. Leave them to dry completely.
   
5. When the surface of the product and film are dry, and lint free, apply the film on the product, and smooth out any air bubbles with the lint free cloth.

If you still have further questions please feel free to contact Power Support
customerservice@powersupportusa.com, or call us at (818) 558-1645