Anti-Glare Film for iPhone 3G/3GS
Product Overview
With the amazing capabilities of the iPhone 3G/3GS in the palm of your hand, why let the negative impacts of glare and fingerprints get in the way? Power Support’s anti-glare film is a custom-fit film that will reduce the visual impacts of glare and finger printing while providing scratch protection. Equipped with an advanced static-cling adhesive, installation is easier than ever and will not leave a residue when removed.
Product Features
- Set includes 2 crystal screen films and 1 pre-installation film
- Protects your precious LCD screen from scratches, dust, and dirt
- Leaves no residue if removed
- Film will not interfere with iPhone 3G/3GS touch screen responsiveness
Installation Instructions
Film Installation Instructions:
Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.
Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.
Step 2: Align the edge of the film to your screen.
Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.
Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.
Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.