Anti-Glare Film Set for iPhone

With the amazing capabilities of the iPhone in the palm of your hand, why let the negative impacts of glare and fingerprints get in the way? Power Support’s anti-glare film is a custom-fit film that will reduce the visual impacts of glare and fingerprints while providing scratch protection. Equipped with an advanced silicone static-cling adhesive, installation is easier than ever and will not leave a residue when removed.

• Set includes 2 anti-glare screen films
• Protects your precious LCD screen from scratches, dust, and dirt
• Film will not interfere with iPhone touch screen responsiveness
• Revolutionary matte finish resists fingerprints and smudges
• Advanced silicone static-cling adhesive technology leaves no residue if removed

Film Installation Instructions:

Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.

Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.

Step 2: Align the edge of the film to your screen.

Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.

Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.

Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.