Black Air Jacket™ Set for iPhone 3G/3GS

With the sleek new styling of the iPhone 3G/3GS in mind, Power Support created a case to match. The air jacket™ is virtually as light as air. Measuring in at a maximum thickness of 1mm, the black air jacket™ showcases the incredible design of the iPhone 3G/3GS while protecting it in a rubber coated plastic jacket, which increases grip and provides an optimal texture. This jacket protects from drops and scratches and is paired with Power Support’s protective screen films, creating an optimal protection solution. 

• Set includes 1 black air jacket™, 1 crystal screen film and 1 anti-glare screen film
• Ultra thin jacket adds no bulk to your iPhone 3G/3GS
• Velvety black rubberized finish
• Protects from scratches, dust and low velocity impacts
• Film will not interfere with iPhone 3G/3GS touch screen responsiveness

Film Installation Instructions:

Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.

Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.

Step 2: Align the edge of the film to your screen.

Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.

Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.

Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.

Jacket Installation Instructions:

Step 1: Place the side of the iPhone 3G/3GS with the volume button inside of the air jacket™ so that the cutouts align.

Step 2: Apply pressure to the back of the case so that the rest of the iPhone 3G/3GS will fit snugly into the air jacket™.