Clear Air Jacket™ Set for iPhone 3G/3GS

With the sleek new styling of the iPhone 3G/3GS in mind, Power Support created a case to match. The air jacket™ is virtually as light as air. Measuring in at a maximum thickness of 0.7mm, the clear air jacket™ allows for the innovative design of the iPhone 3G/3GS to stand out while providing protection from drops and scratches. The nearly unnoticeable jacket comes with Power Support’s screen protection films to provide an all-encompassing protection solution. 

• Set includes 1 clear air jacket™, 1 crystal screen film and 1 anti-glare screen film
• Ultra thin jacket adds no virtually bulk to your iPhone 3G/3GS
• Protects from scratches, dust and low velocity impacts
• Film will not interfere with iPhone 3G/3GS touch screen responsiveness

If using clear air jacket with iPhone 3G, apply clear dots to back of the device before putting jacket on.

Film Installation Instructions:

Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.

Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.

Step 2: Align the edge of the film to your screen.

Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.

Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.

Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.

Jacket Installation Instructions:

Step 1: Place the side of the iPhone 3G/3GS with the volume button inside of the air jacket™ so that the cutouts align.

Step 2: Apply pressure to the back of the case so that the rest of the iPhone 3G/3GS will fit snugly into the air jacket™.