Clear Crystal Jacket with holster for iPhone 3G/3GS

Thick, clunky cases are a thing of the past when Power Support’s engineered slim Crystal Jacket can provide optimal protection without adding unnecessary bulk.  This jacket allows for easy access to all function buttons on the iPhone 3G without compromising any protective properties. Included crystal screen film and revolutionary rotating holster with fold away viewing stand, provides a complete protection solution.

• Set includes 1 crystal jacket, 1 clear bezel protector, 1 crystal screen film and 1 rotating holster
• Precision fit light weight jacket helps eliminate dust from being trapped between the case and iPhone 3G/3GS
• Protects from scratches, dust and low velocity impacts
• Film will not interfere with iPhone 3G/3GS screen responsiveness
• Revolutionary rotating holster with fold away viewing stand
• Holster allows clipping to your belt or bag strap

To remove the crystal jacket from your iPhone 3G/3GS, place a credit card between the front and back of the crystal jacket's lower left hand corner and apply slight pressure.

Film Installation Instructions:

Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.

Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.

Step 2: Align the edge of the film to your screen.

Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.

Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.

Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.

Crystal Jacket Installation:

Step 1: Place the side of the iPhone 3G with the volume button inside of the jacket, and place the clear bezel protector on top so the so that the cut outs align. 

Step 2: Apply pressure to the back of the case so that the rest of the iPhone 3G will fit snugly into the jacket.