Crystal Film for iPhone 3G/3GS
Product Overview
Protection from scratches is a must, and Power Support’s crystal film for iPhone 3G/3GS is the perfect solution. This custom-fit screen protector allows for the vibrant colors of your LCD screen to shine through without compromising picture quality, touch screen sensitivity or any functionality of your iPhone 3G/3GS. With advanced silicone static-cling adhesive technology, this film does not require a difficult installation process and is residue free.
Product Features
- Set includes 2 crystal screen films and 1 pre-installation film
- Protects your precious LCD screen from scratches, dust, and dirt
- Leaves no residue if removed
- Film will not interfere with iPhone 3G/3GS touch screen responsiveness
Installation Instructions
Film Installation Instructions:
Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.
Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.
Step 2: Align the edge of the film to your screen.
Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.
Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.
Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.