Designer Jackets for iPhone 3G/3GS

Protection can be unique. Protection can have style. With these ideas in mind, Power Support has teamed with different artists and designers from around the world to create a protection option different from any other. With a Power Support Jacket base and paired with screen protection films, these jacket sets provide style and protection.

• Unique printing on Power Support’s Crystal or Air Jacket
• Includes protective screen films (1 anti-glare and 1 crystal)
• Style and protection

Film Installation Instructions:

Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.

Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.

Step 2: Align the edge of the film to your screen.

Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.

Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.

Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.

Jacket Installation Instructions:

Step 1: Place the side of the iPhone 3G/3GS with the volume button inside of the air jacket™ so that the cutouts align.

Step 2: Apply pressure to the back of the case so that the rest of the iPhone 3G/3GS will fit snugly into the air jacket™.