Crystal Jacket Set for iPod nano 4G

Simple and streamlined, the Power Support crystal jacket lets the color of your iPod nano 4G shine through while keeping it safe from scratches. The Power Support crystal jacket is precisely engineered to ensure complete functionality and the best user experience possible. And it keeps your iPod nano 4G looking pristine by protecting against low velocity impacts, scratches, dust and dirt.

• Set Includes 1 crystal jacket, 1 crystal screen film, 1 3D click wheel film and 1 clip stand
• Design compliments iPod nano 4G style and colors
• Precision engineering for a thinner yet more protective structure
• Clip stand allows vertical hands-free viewing

Note: The Crystal Jacket and Body Film cannot completely protect the iPod nano from all scratches or abrasions. They will not protect your device from damage due to collisions or strong impacts. If your iPod crystal jacket gets dirty, simply remove the iPod nano from the case and clean the jacket with a neutral detergent and water. Let the crystal jacket dry completely before replacing the device.

Film Installation Instructions:

Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.

Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.

Step 2: Align the edge of the film to your screen.

Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.

Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.

Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.

Jacket Installation Instructions:

Step 1: Remove the Crystal Jacket from the packaging and separate the front and back of the crystal jacket.

Step 2: Take your iPod and place it into the back potion of the crystal jacket. Take the front of the crystal jacket and align it with the back portion.

Step 3: Once you have this aligned snap the front and back of the case into place

Step 4: If you want to remove the Crystal Jacket from your iPod, place a credit card between the front and back of the jacket in the bottom left hand corner and apply pressure.