Power Support Privacy Film for iPhone 3G/3GS

With the user’s privacy and security in mind, Power Support created the Privacy Film for iPhone 3G/3GS. Unlike most Privacy Films, this four-way Privacy Film will distort images in both the vertical and horizontal viewing positions. This film supports your security while protecting your screen from scratches. 

• Keeps LCD screen free of scratches, dirt, and dust
• Increases security by blurring images/passwords/text messages/emails from any side angle
• Works in both the horizontal and vertical position
• Advanced static cling for stay put adhesion
• Will not leave sticky residue when removed

Film Installation Instructions:

Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.

Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.

Step 2: Align the edge of the film to your screen.

Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.

Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.

Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.