Silicone Jacket for iPhone 3G/3GS

Finding a silicone case worthy of protecting your iPhone 3G/3GS has become quite the challenge, and Power Support created its silicone jacket line with this in mind. Made with medical grade silicone and covered in a lint-repelling finish, Power Support’s silicone jackets are perfectly engineered to provide an optimal fit and the best user experience possible with vibrant color options. This jacket protects from drops and scratches and is paired with Power Support’s protective screen films to create a perfect protection choice. 

• Set includes 1 White Silicone Jacket, 1 crystal screen film and 1 anti-glare screen film
• Protects from scratches, dust and low velocity impacts
• Film will not interfere with iPhone touch screen responsiveness
• Jacket is made of medical grade silicone with a lint repellant smooth finish

Film Installation Instructions:

Clean your screen with a lint-free cloth to remove any dirt. Make sure that there are no dust particles or oil deposits on your screen.

Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.

Step 2: Align the edge of the film to your screen.

Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.

Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.

Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.

Silicone Jacket Installation Instructions:

Step 1: Ensure all dust and grime is cleaned off of the body of your iPhone 3G/3GS.

Step 2: Fit the silicone jacket around the iPhone 3G/3GS by stretching the silicone. 

Step 3: Adjust the case so that it is on the iPhone 3G/3GS straight.