Power Support Air Jacket for iPhone 3G (Black & Clear)

Power Supports Air Jacket for iPhone3G is the perfect slim accessory for your already slim iPhone3G. Developed with the consumer in mind, the Air Jacket is a hard backing that fits snugly to the back of the iPhone3G. Virtually thin as “Air”, the Air Jacket measures .7mm and offers optimal protection and functionality for your iPhone3G.

• Protects from scratches, dust, and impacts
• Compliments iPhone3G aesthetics and allows unimpeded use of the devise
  
• Adds no bulk or weight to the iPhone3G
  
• Anti Glare and Crystal Films allow you to have versatility in protection for your LCD screen

Set Includes:

• 1 Air Jacket
  
• 1 Crystal Film for LCD protection
  
• 1 Anti Glare Film for LCD protection

Note: The Air Jacket and Body Film cannot completely protect the iPhone3G from all scratches or abrasions. They will not protect your player from damage due to collisions or strong impacts.If your iPhone3G Air Jacket gets dirty, simply remove the iPod from the case and clean the Jacket with a neutral detergent and water. Let the Air Jacket dry completely before replacing the player.

Item	Product	Price
PIA-07E	iPhone 3G Air Jacket (Clear)	$34.95
PIA-08E	iPhone 3G Air Jacket (Black)	$34.95

INSTALLATION INSTRUCTIONS

1st Step: Thorough Cleaning

1. Clean your iPhone LCD screen with a lint free cloth and a small amount of glass cleaner. Ensure that all fingerprints and particles have been removed.
2. Wipe off any excess glass cleaner so that the screen is completely dry.

2nd Step (Pre-Installation Film): Removing any dust particles that may have fallen onto your screen.

1. Remove one half of the white backing of the pre-installation film.
2. Without touching the LCD screen directly with your fingers, place the half of the film without the backing onto the LCD screen.
3. Without touching the LCD screen, remove the second half of the backing. Apply the rest of the film to the LCD screen. Rub it down thoroughly to ensure that the Pre-Installation film has captured all dust particles.
4. Remove the Pre-Installation film by pulling it off by the excess film. Do not touch the LCD Screen.

3rd Step (Crystal/Anti-Glare Film): Applying the Film

Note: Power Support’s Protective Screen Films come attached to a basic transparent plastic backing. Whenever applying films, you can touch either side of this transparent backing and the non-adhesive side of the film. However, do not touch the adhesive side of the film because the oils from your skin will compromise the adhesive qualities of the static cling adhesive.

1. Without touching the adhesive side of the film, push down on the backing to expose the adhesive side.
2. lign the edge of the film with the bottom of the face of the iPhone. You can use the button or ear piece hole as alignment tools. Once a proper alignment is found, apply part of the film.
3. Without touching the face of the iPhone or the adhesive side of the film, allow for the rest of the film to apply by peeling off the rest of the backing from underneath the film.
4. Cover your finger in a lint-free cloth and rub out any air bubbles.

Note: Anti-Glare Film cannot completely protect the iPhone3G from all scratches or abrasions. It will not protect your player from damage due to collisions or impacts. 

TOP