G5 Skate

The G5 Skate alleviates the cumbersome fuss and bother that goes with having to move the Apple G5 tower to attach and detach peripheral devices, network cables, and other wiring. Power Support's G5 Skate allows for easy access and movement of the G5 tower, plus it cushions the machine and absorbs vibrations. Using the G5 Skate also makes cleaning under and behind the tower virtually trouble-free. Made of aluminum and steel, the G5 Skate is agile and extremely durable.



Materials
- Substance: Steel
(aluminum silver paint)
- Roller: Single piece
aluminum wheel

Parts included
- 2 pieces of protective tape
- 2 stoppers

Installation instructions

In order to avoid damaging the G5 tower during installation of the G5 Skate, please work on a flat, level surface. Also, spread a cloth across the surface working space.

1. Turn the G5 Roller Skate upside-down and remove the four screws in the white circles with a Phillips screw driver and remove attached metal brackets (see next photo)	* Photo shows metal brackets that you have removed	2.Peel backing off of the protective tape and add to the edge tray lip that holds the G5 in place.
3. Turn your G5 upside down and set on a flat, soft surface to prevent scratching. Place G5 Roller Skate on the bottom of G5 and center evenly as seen in photo.	4. Insert the metal brackets through the footing and line up metal bracket so groove sits on top of aluminum wheel rod.	5. Use the screws that you removed in step 1 to tighten metal bracket down. This will hold the G5 in place so it will not fall off of the G5 Roller Skate.
Flip your G5 over and you are done.	* To prevent the computer from accidentally rolling, place the two stoppers as shown above.

The photograph demonstrates the anti vibration absorbing technique of G5 Roller Skate.

TOP